Make your own free website on



Husky 1250

Operator's and Maintenance Manual

Page 2

Figure 1

Figure 3

For your own personal reference, fill in the spaces provided below.

Model Number of Unit _______________________

Serial Number of Unit _______________________

Engine Model Number _______________________

Engine Serial Number _______________________

Engine Spec. Number _______________________


To ensure prompt service when repairs or adjustments are required, your Bolens Dealer must have the following information:

1. Model number of unit.

2. Serial number of unit.

3. Model number of engine.

4. Serial and Spec. number of engine.

Your Bolens dealer has available a master Parts List for your unit. He can identify any parts you may require and furnish genuine factory replacements.

When ordering engine component parts, consult the Engine Manufacturer's Manual.



(Specifications subject to change without notice)


Bolens reserves the right to make changes or improvements to its products without obligation to install same on products previously manufactured.


Engine  28.86 cu. inch Wisconsin
Type  4 cycle, single cylinder, air cooled
Fuel capacity 5.3 gallons
Engine oil capacity 2 quarts
Transmission oil capacity 10 quarts
Air cleaner Dry type
Drive  Hydrostatic transmission
Speed. Infinitely variable.

Forward: approx. 0-8 mph

Reverse: approx. 0-4 mph

Power to attachments Triple belt drive (P.T.O.), with universal joints and splined shaft.

Front: 5.70/5.00-8

Rear: See optional equipment section, page 14.

Height  45 inches
Width 38 inches
Length  72 inches
Wheelbase  49 inches
Turning radius 54 inches
Ground clearance 8-1/2 inches
Shipping weight 975 lbs.


Page 3