|
2. Remove capscrews (F) and remove baffles, figure 20, exposing cooling fins (G).
3. Thoroughly clean cooling fins of all dirt, grease and
debris.
4. Reverse above procedure to replace baffles and side panels.
HOOD REMOVAL
1. Open hood.
2. Disconnect plug for headlight
wiring.
3. Unhook lanyard from hook on muffler support.
4. Remove hood and grille
assembly.
AIR CLEANER (Figure 21)
Under normal operating conditions, disassemble and service air cleaner components every 50 hours of operation. Do this more frequently (even daily) if extremely dusty or dirty conditions prevail.
Remove the polyurethane precleaner (H) from around the dry type paper air cleaner element (I). Wash this precleaner in a solution of water and detergent. Remove the excess water by squeezing like a sponge and allow to dry
|
