Make your own free website on Tripod.com


 

 

Husky 1250

Operator's and Maintenance Manual

Page 10

MAINTENANCE GUIDE

 

AFTER EVERY 10 HOURS OF OPERATION

AFTER EVERY 25 HOURS OF OPERATION

AFTER EVERY 50 HOURS OF OPERATION

Check battery

X*

 

 

Check air in tires (6 to 8 lbs.)

 

X*

 

Check engine crankcase oil

See Engine Manufacturer's Manual

Drain engine crankcase oil

 

 

X*

Check transmission oil (add to filler plug level as needed)

 

X

 

Check cooling air screen

X*

 

 

Lubrication points (see lubrication guide)

X*

 

 

Check generator-starter mounting bolts

 

X

 

Check for belt wear

 

X

 

* Varies depending on operation conditions, climate etc.

 

LUBRICATION

Proper lubrication and regular maintenance will increase the operating life of your HUSKY and attachments. Negligence on the part of the operator in regard to lubrication or general maintenance can depreciate the dependability of this rugged and durable vehicle.

It is suggested that lubrication recommendations in this manual be followed. A lubrication schedule prepared by the operator would be beneficial.

The numerically listed locations on the lubrication chart correspond to those numbers shown on Figures 19 and 20.

 
LOCATION TYPE OF
LUBRICATION
AMOUNT OF
LUBRICATION
FREQUENCY
OF LUBRICATION
1. Wheel Bearings Wheel Bearing Grease Pack Once a year
2. Front Wheel Spindles Gun Grease As Req'd. 10 hrs.
3. Front Axle Pivot Gun Grease As Req'd. 10 hrs.
4. P.T.O. Housing Gun Grease As Req'd. 10 hrs.
5. Air Cleaner

See Engine Manufacturer's Manual

*6. Speed Lock Pivot Oil Coat surfaces 25 hrs.
*7. Disc Brake Linkage Oil Coat surfaces 25 hrs.
*8. Hydrostatic Transmission Automatic Transmission Fluid Type A Add to plug level Check once a week or 25 hrs.
9. Transmission Filter     Change every 300 hrs.
or with oil change
10. Hood Hinge Oil Coat surfaces 25 hrs.
11. Generator-Starter No lubrication require    
*12. Universal Joints Gun Grease One stroke of grease gu n 8 hrs.
13. Pivot Shaft Gun Grease One stroke of grease gun 8 hrs.
*14. Speed Control Pivot Oil Coat surfaces 25 hrs.
*15. Engine Crankcase

See Engine Manufacturer's Manual

capacity 10 quarts. See your dealer for specified oil for complete refills.
* More frequent if application demands.
NOTE: Hand type grease gun recommended when greasing your unit. Hi-pressure type grease guns could cause damage to the fittings. Lubricate all linkages, levers and pins not equipped with grease fittings with an oil can once a week.
.

 

Previous

Page 11

Contents

Home